Pneumatic tents for humanitarian actions
Our pneumatic tents have been developed especially for fast use in difficult conditions. They fulfill all requirements of a modern rescue equipment.
01st June - 30th June 2020
share, order,film the set up & benefit.
Follow the three steps below and benefit with up to 15% discount on your order until 30th June 2020.
Questions? Contact us now for further information: email@example.com
Light and compact equipment
GYBE® tents are characterized by a low net weight. The special texture allows for a compact pack size.
A 4 x 4 m tent can be carried by one person in the transportation bag to the place of action.
HUMANITY SET EMERGENCY
The HUMANITY TENT EMERGENCY consists totally of specifically developed material whose fabric structure, made from synthetic fibres, is certified with the fire protection certificate 1 (B1). The used materials are water-repellent (according to ISO 4920, quality grade 5). The HUMANITY TENT EMERGENCY is fitted with a One-Pump-System as standard, allowing inflation by an electronic pump. The HUMANITY TENT EMERGENCY is available in 3 different predefined versions.
HUMANITY SET EMERGENCY HP
The HUMANITY TENT EMERGENCY HP is, unlike the HUMANITY TENT EMERGENCY, fitted with a special inlet valve for inflation by compressed air bottles and compressors. Furthermore, the integrated pressure control valve allows for maximum security when erecting.
HUMANITY SET INDIVIDUAL
The difference with the HUMANITY TENT INDIVIDUAL is the range of material colors, this is applicable for the inflatable support structure, tent roof, side panels and the thread (according to Factsheet specifications). The side panel variations can also be freely selected from the 6 different versions. It is also possible to print over the entire surface of the roof and side panels.
HUMANITY SET INDIVIDUAL HP
The HUMANITY TENT INDIVIDUAL HP is, unlike the HUMANITY TENT INDIVIDUAL, fitted individually with a special inlet valve for inflation by compressed air bottles and compressors. Furthermore, the integrated pressure control valve allows for maximum security when erecting.View whole color palette >
Color paletteHide color palette
* Colors on screen may differ from material colors. Use Pantone values as indicator
If the Design is real, then our Reality is brilliant
The GYBE® Humanity Tent® is not only impressive because of its remarkable design. Thanks to a modern printing process the GYBE® Humanity Tent® can be printed as of now photorealistic. By means of a new refining method your tent becomes a canvas of brilliant photos with impressive sharpness, high color intensity and captivating resolution.
The GYBE® Humanity Tent® therefore attracts everyone’s attention and turns into a unique advertising space. Furthermore, the new printing process makes it possible to individually color the outer panels of the Roof and Sides.
Sublimation printing is a process in which the color pigments are brought deeply into the printable material. A sublimation foil is digitally printed in photo quality and then with pressure and heat transferred to the material.More about sublimation printing >
The printing result is extremely brilliant because the warmth gives the pigments a winning brightness and they durably adhere to the fabric. Sublimation printing is extremely suitable for large or fullprint designs. You can print over the complete length and breadth of the material, which enables the colorizing of the Roofs or Sides in your Corporate Identity colors.
Firstly, the special foil is printed with the wished design on the reverse. The applied ink contains many chromophoric pigments and is highly concentrated.
Subsequently, the material to be printed and the special foil are pulled together through a heating press. Here the colorant from the carrier foil is transferred to the material under high pressure and temperature.
As opposed to sublimation printing, transfer printing is especially suitable for small to mediumsized designs, which are to be shown advantageously on colored material.More about Transfer printing >
Modular and extendable
The special engineering technique allows to react flexibly and fast to the circumstances on-site. A modularly hospital, an operational tent or a whole city of tents: Tents of various sizes can be connected due to the FUSION Panels. This is great for planning the effective area as well as for the logistics.
The pneumatic tents may be extended by various additional components:Show extensions >
Immediately ready for use
Our humanitarian tents create a protective area fast, for casualties, as an accommodation for the operation control, or for the placement of auxiliaries. We created a special compressed air system, which allows to set up the tent in less than 2 minutes.
Set Up Times
Setup of the supporting structure
The inflatable supporting structure of the tents consists of a resilient Dacron-Shell. We use an elastic PU-foil for the hermetic interior hose.
The applied materials have been aligned on resistance, demands and operational speed.
Because of the integrated One-Pump-System, the tent can be inflated by using external compressed air supplies (compressed air bottles, compressors). The air is split up by a central induction valve into three air chambers by using hoses. Unlike other inflatable tents, the GYBE® humanitarian tent does not need a permanent fan.
Scope of delivery
In the standard scope of delivery the tent comes with 3 continuous sidepanels and 1 sidepanel with vertical zipper. As well as a set of sandbags or waterbags for stabilization bracing ropes and one repair kit.