VW bus awning connection
So that the VW Bus Tent fits with every T5 and T6 model we offer various connection parts- the so-called Fusion Panels!
The perfect VW Bus Tent
Inflatable bus awnings - get yours
The GYBE® Bus Tent is the ideal supplement to your adventure equipment. Pack everything you need for your free time in the bus and hit the road.
buy now
Find your awning connector
California-welting-rail
The connection between the Bus and the Tent is realized through the T5 and Т6-California-welting-rail. You can easily purchase the welting-rail at your local VW dealer under following article number:
7H7 875 303
7H7 875 303
guide-rail
The connection between the Bus and the Tent is realized through the guide-rail which can be installed on the roof. You can easily purchase the guide-rail at your local VW dealer under following article numbers:
Left side / 7H1 860 181 A QZU
Right side / 7H1 860 182 A QZU
Left side / 7H1 860 181 A QZU
Right side / 7H1 860 182 A QZU
guide-rail
The connection between the “T5/T6 LONG VERSION” Bus and the Tent is realized through the guide-rail which can be installed on the roof. You can easily purchase the guide-rail at your local VW dealer.
guide-rail
The connection between the Bus and the Tent is realized through the guide-rail which can be installed on the roof. You can easily purchase the guide-rail at your local VW dealer under following article numbers:
Left side / 7H1 860 181 A QZU
Right side / 7H1 860 182 A QZU
The difference between the CenterScrew and the Roof Slider version is, that you can still use a “roof rack” which is installed on the guide-rail. The necessary GYBE Fusion guide-rail sliders can be installed permanently in between the roof rack.
Left side / 7H1 860 181 A QZU
Right side / 7H1 860 182 A QZU
The difference between the CenterScrew and the Roof Slider version is, that you can still use a “roof rack” which is installed on the guide-rail. The necessary GYBE Fusion guide-rail sliders can be installed permanently in between the roof rack.
Multirail
The connection between the Bus and the Tent is realized through the T5/Т6-Multirail (not California rail). Please note that the Fusion-KEDER rope has a diameter from 8,5 mm and will not fit to the California welting rail.
Multirail
The connection between the T5/Т6 LONG VERSION Bus and the Tent is realized through the T5/Т6-Multirail(not California rail). Please note that the Fusion-KEDER rope has a diameter from 8,5mm and will not fit to the California welting rail.
Bus Awning colorways
We have developed two special color variants for the Mercedes Bus Marco Polo, which adapt themselves stylishly to all available busoutfits. The Bus Tent is available in the designs HANGOVER, FROST, MIDNIGHT, SUNSET and GENERATION.
Harmonious basic colors are stylishly staged with colored seams, high-quality workmanship and prints and complete your Adventure Equipment.
buy now
Harmonious basic colors are stylishly staged with colored seams, high-quality workmanship and prints and complete your Adventure Equipment.
Technical features
The Bus Tents are made of flame-retardant materials, in addition all side parts are water-repellent and UV-stabilized.
VW Bus Tent accesories
The BUS TENT is delivered with a backpack carrying case, a removable front- and rearpanel, Fusion panel of choice, a double-stroke hand pump, pegs and bracing ropes, as well as a repair kit.
ONLY FIVE MINUTES
The GYBE® Bus Tent will be up in just five minutes: Link your electric or battery-powered pump with the 12-V-outlet of your bus, inflate the tent and attach it to your bus with the help of the welt track.It doesn't get any easier than that!
buy now
VW Bus Tent Dimensions
| Height | 2,3 m |
| Width | 3,75 m |
| Depth (without guy ropes) | 2,9 m |
| Height of doorway Front | 1,87 m |
| Height of doorway Rear | 2,05 m |
| Roofed area (tent attached) | 7,9 m² |
| Roofed area | 4,8 m² |
Set up times
| Inflating the support structure | 5 min |
| Set up time total | < 10 min |
VW Bus Tent Weight
| VW Bus Tent (including backpack) | 15 kg |
| Hand pump | 1 kg |
| Fusion Panel | 1 kg |
| Pegs set | 2 kg |
Set up of the supporting structure
The inflatable supporting structure consists of a high-strength Dacron-shell. We use an elastic PU-foil for the hermetical interior hose.
This construction has been tested under heaviest conditions in the Kite-sports thousands of times.
The One-Pump-System
The One-Pump-System allows for inflation of the tent via compressed air bottles or with compressors through a central induction valve. This is done by splitting up the air streams into three air chambers through hoses. The tent is set up in under 5 minutes.